High-performance air systems demand modern design approaches with leading-edge products and technology in order to optimize comfort, reduce energy consumption and ensure the long-term sustainability of a building.
Click on one of our product group titles below to learn more.
Chilled Beams use water to move energy through a building and service the building’s sensible (dry) cooling load, relying on the air-side simply to meet ventilation and latent (wet) load requirements.
This drastically reduces primary air volumes supplied to a space and leads to energy savings, improved comfort levels, and ability to effectively integrate a dedicated outdoor air system (DOAS).
Radiant heating and cooling systems offer an energy-efficient alternative to all-air systems.
In most cases, the supply air volume of the air handling system is limited in size to satisfy only the ventilation and latent loads, with the radiant system making up the balance of the heating and cooling loads.
The Price VAV diffuser is a simple stand-alone or networked device that provides variable air volume control when supplied with air in a suitable range of temperature and pressure.
VAV diffusers allow for low-pressure, low-energy consumption systems, better room air mixing and individual thermostat control for superior thermal comfort.
Displacement Ventilation supplies air directly into the occupied portion of the space at low air speeds. The air rises as it comes in contact with occupants and carries particles and pollutants up into the non-occupied zone, where it is removed and filtered. It does all of this while being one of the most energy efficient and quiet methods of air ventilation on the market.
Underfloor Air Distribution (UFAD) is a system that typically delivers air from a pressurized air plenum beneath a raised access floor, relying on the natural buoyancy of air to remove heat and pollutants.
If load distribution shifts, the system will compensate as the buoyancy forces drive the air toward the loads.
Price Controls offers a wide variety of application-specific controllers to help achieve building goals.
Controllers can be applied to new installs, retrofits and tenant improvements to save time during installs and increase end-result energy savings.